Contributed By

CB Logo 4

Community Editorial Team

at Comcast Business

View Profile

T-1 or Ethernet: A Side-by-Side Comparison

July 08, 2014

Internet connectivity is a critical component of business operations. You need to understand the options when it comes to connectivity choices so that you can make the right decision for your business.

Internet connectivity is a critical component of business operations. You need to understand the options when it comes to connectivity choices so that you can make the right decision for your business. Today, that often means deciding between T-1 and Ethernet. Both provide dedicated Internet access (DIA) service, but they are different in the way they are designed and delivered. Here’s a side-by-side comparison of T-1 and Ethernet to help you understand the differences in delivery and speed, costs, and scalability.

Delivery and Speed

T-1
T-1 DIA service is delivered over either a single T-1 circuit (1.5 Mbps) or multiple bonded T-1 circuits and requires a router with T-1 WAN interfaces or ports. The WAN router typically provides a 10/100 Mbps Ethernet port to connect to your router or an available Ethernet port on your Ethernet LAN switch. 

Ethernet
Ethernet DIA service is delivered over a single Ethernet fiber optic connection to offer any amount of bandwidth from 2 Mbps to 10 Gbps, typically providing either a 10/100 Mbps, 1 Gbps, or 10 Gbps Ethernet port from an Ethernet DIA service demarcation device used to attach your router. The Ethernet port speed you select will depend on your initial bandwidth requirements and your anticipated incremental needs for the duration of the service agreement. Note that, unlike T-1-based DIA services that operate at the 1.5-Mbps-speed of the T-1 circuit, Ethernet DIA services are not offered based on the circuit speed but can be purchased in bandwidth increments up to the Ethernet port speed.

Costs

T-1
In order to keep entry costs low and eliminate interoperability issues, the T-1 service provider will include a router on which the T1 circuit(s) terminate(s). The monthly recurring cost for T-1 service depends on the number of T-1 circuits deployed.

Ethernet
The Ethernet DIA service demarcation device is included in the initial setup cost. If you can use an available Ethernet port on your router, this eliminates capital expense required to connect the service. If your building does not have a fiber optic connection, your Ethernet DIA service provider will deliver it at a one-time cost. There is a monthly recurring charge based on the amount of bandwidth your organization requires.

Scalability

T-1
If you need more bandwidth – which is purchased in 1.5 Mbps increments – you may be required to purchase new T1 interfaces to support the bonding of the additional T-1 circuits, if not a new router altogether. Typically there will be another set-up cost in addition to the higher monthly recurring costs for the additional bandwidth. When Internet capacity requirements approach 12-15 Mbps, or 8 to 10 bonded T1s, many businesses switch to a higher-speed circuit, such as a DS3/T3. The cost of the single DS3 at 45 Mbps is about the same as 8-10 T1s, but with more than twice the bandwidth. However, switching to a DS3 will likely result in service disruption to upgrade equipment and circuits, a process which can take weeks or even months.

Ethernet
With Ethernet, you can scale your bandwidth rapidly and easily well beyond the typical ranges provided by bonded T1 configurations and DS3s without having to switch Internet access technologies or providers. Ethernet DIA capacity can be expanded so efficiently because your provider can remotely reconfigure the service demarcation device. The upgrade is accomplished transparently – at most, you may need to restart the Ethernet service demarcation device.

This article is available exclusively to
Comcast Business Community Members.

Join the Comcast Business Community to read this article
and get access to all the resources and features on the site.

It's free to sign up

OR

Join the Discussion

300 Characters Left

Gregory Kohs

December 09, 2014

In some recent research we conducted, we found that about 14% of non-cable customer businesses report that they have either T1 or DS3 Internet connection at their workplace. About half that number report Ethernet in place.

300 Characters Left

Tomas Yanez

September 10, 2014

Correct, J Young. A typical cross-over point from bonded T1s to a DS3 is about 8 to 10. The article used 2 T1s as a typical example (it has since been amended). Regardless of the cross-over point, the premise is the same: Ethernet is a more scalable, elegant option than legacy TDM services.

300 Characters Left

J Young

September 06, 2014

Your statements about bonding T1's is flat out incorrect. A T3 isn't the next step after a 3M bond. Heck, Adtran makes an octal wide module supporting 8 DS1s, and those can be PPP multi linked just fine. In many places Ethernet just isn't viable, and printing inaccurate articles is inexcusable.

300 Characters Left

Tomas Yanez

July 24, 2014

Doug - We were talking with an Ethernet analyst recently. Ethernet turned 40 last year, so the analyst kind of assumed that were very few T1s were still out there in use. We had to tell him that was not the case, not even close! Many times fiber is not in or near the business' building.

300 Characters Left

Doug Broad

July 23, 2014

The most interesting aspect of this is that businesses are still using T1s! Since they are slow, costly and do not scale easily, I'm guessing this speaks less to them as a viable connectivity option and more to the fact that businesses often have little competitive choice.

300 Characters Left
comcast-ctas-ethernet-banner-315x289-v1

Resource Center

Why Comcast
Comcast Business delivers fast, reliable networking solutions built for business performance and growth

Current Offers
Take advantage of our limited time offers with a customized plan built to give your business an edge over competitors

Community Forums
Find solutions, share knowledge and get answers from customers and experts

Help & Support
Get help and support from Comcast experts

Resource Library
Find out how Comcast has helped clients like you meet their needs with informative White Papers, Case Studies and more

Internet Speed Test
Try the Comcast Business Internet Speed Test to see how your business stacks up

Social Media
Connect with Comcast and join the conversation on LinkedIn, Twitter, Facebook and Google+